Category Uncategorized

heat-plates

Technical Specification Heat-Plates (ACC-HPX-XXX) Aluminium heat plates are designed to take 15 – 17mm UFH pipes. We are able to supply the plates in any width and 1m lengths, channel centres at varying distances, in either fit from below or…

HydroCEM 550

HydroHeat HYDROCEM 550 Fibre Preparation of all common substrates, such as sand/cement screeds, concrete, sound asphalt,calcium sulphate screeds, ceramic, quarry and natural stone tiles, underfloor heating, plywoodand timber boards to receive floor finishes. OVERVIEW HYDROCEM 550 FIBRE-REINFORCED LEVELLER is ideal…

lo-screed panel

Technical Specification Lo-Screed (ACC-LOCP) Easy one-man-installation for favourable project calculations. Lower levels of waste, thus reduced costs and less effort when it comes to disposal. Secure pipe holder for standard-compliant installation and uniform temperature distribution, at the same time simple…

Multi-Corner

Technical Specification Multi-Corner (ACC-GYPCOR) The Multi-Corner gypsum fibreboards are composed of high-quality calcinated gypsum and selected paper fibres. The 18mm height provides a low profile complete system that can take tiles and wood floors directly. Pre-routered channels for 12mm pipe…

Multi-End

Technical Specification Multi-End (ACC-18END) The Multi-End gypsum fibreboards are composed of high-quality calcinated gypsum and selected paper fibres. The 18mm height provides a low profile complete system that can take tiles and wood floors directly. Pre-routered channels for 12mm pipe…

Lo-Board

Technical Specification Lo-Board (ACC-18OL) The Lo-board gypsum fibreboards are composed of high-quality calcinated gypsum and selected paper fibres. The 18mm height provides a low profile complete system that can take tiles and wood floors directly. Pre-routered channels for 12mm pipe…

Edge insulation

Technical Specification Edge Insulation (ACC-EI) HydroHeat edge insulation strips are made of low density polyethylene (LDPE), 13 cm high and 25 linear metres long. HydroHeat edge insulation are ready perimeter strips that provide an expansion gap between the floor and…

Clip-plate

Technical Specification Screed Clip-Plate (ACC-CP) Resistant to impact and walkable due to high surface strength. Easy one-man installation for favorable project calculations. Secure pipe holder for standard-compliant installation and uniform temperature distribution, at the same time simple repositioning is possible.…

Clip-Rail

Technical Specification Screed Clip-Rail (ACC-CR) Rails are used for fixing pipes for radiant heating and cooling, both for wall and floor in single-family houses, public buildings, industrial buildings and sports facilities. Rails are fitted with holders, which thanks to its…