Suspended Heat Plates Underfloor Heating System

Suspended Heat Plates utilise heat emission plates laid between the joists which are formed to accommodate the underfloor heating pipework. Typically, these will lay into soft insulation or pre-grooved insulation board supported by battens and board between the joist ensuring maximum contact with the floor finish and optimising the total heat output whilst minimising downward heat loss. We stock 16mm 200cc and 133cc plates but can obtain almost any centres or pipe size suitable plates. Made from 0.5mm thick aluminium in an omega pattern which helps hold the pipe in place. Plates should be spaced with a 5mm gap between each plate and should be appropriately tacked along each edge. When the plates are cut the edges should be deburred to avoid tearing/puncturing the pipe.